使用终端安装 Solaris 9
16、等待一会，出现提示：
q Set the Default Route qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqq
To specify the default route, you can let the software try to detect one
upon reboot, you can specify the IP address of the router, or you can choose
None. Choose None if you do not have a router on your subnet.
> To make a selection, use the arrow keys to select your choice and press
Return to mark it [X].
Default Route
qqqqqqqqqqqqqqqqqqqqqqqqqq
[X] Detect one upon reboot
[ ] Specify one
[ ] None
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
提示你设置缺省网关，本例中，我们选择None，现在不设置缺省网关，以后在设置，使用上下
箭头，移动光标到[ ] None位置后，按空格键选中，然后按F2键继续安装；
17、出现如下提示：
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Networked: Yes
Use DHCP: No
Primary network interface: ce0
Host name: rac1
IP address: 192.168.0.1
System part of a subnet: Yes
Netmask: 255.255.255.0
Enable IPv6: No
Default Route: None
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F4_Change F6_Help
提示你确认上面输入的信息，如果上述的输入信息有错，可以按F4键后重新输入；如果正确，
按F2键后继续安装；
18、出现提示：
q Configure Security Policy: qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Specify Yes if the system will use the Kerberos security mechanism.
Specify No if this system will use standard UNIX security.
Configure Kerberos Security
qqqqqqqqqqqqqqqqqqqqqqqqqqq
[ ] Yes
[X] No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
配置安全策略，本例中，我们选择No,因此按F2键继续安装；
19、出现提示：
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Configure Kerberos Security: No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F4_Change F6_Help
确认刚才输入的信息，如果刚才输入的信息有错，按F4键重新输入；如果正确，按F2键继续安装；
20、出现提示：
q Name Service qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqq
On this screen you must provide name service information. Select the name
service that will be used by this system, or None if your system will either
not use a name service at all, or if it will use a name service not listed
here.
> To make a selection, use the arrow keys to highlight the option
and press Return to mark it [X].
Name service
qqqqqqqqqqqq
[X] NIS+
[ ] NIS
[ ] DNS
[ ] LDAP
[ ] None
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
配置名字服务，本例中，我们选择None（不采用任何名字服务）。使用上下箭头移动光标到
None后，按空格键，选中该选项，按F2键继续安装；
最新相关文章- ·SUN 系统安全实施总结
- ·使用终端安装 Solaris 9
- ·在 Solaris 8.0 上安装SSH
- ·solaris安装 apache + php + mysql
- ·SunNet专业系列网站系统安装方法
- ·SUN系统的基本安全配置
- ·如何以Solaris架设FTP虚拟系统
- ·深入应用:将SOLARIS设置成软路由器
- ·深入应用:将SOLARIS设置成PPP拨入服务器
- ·从Solaris上移除Netscape Message Server
- ·我使用SOLARIS的初步设置
- ·Solaris如何改变系统运行级别 init
- ·为Sun服务器配置多网卡
- ·谈谈Solaris系统性能上的维护
- ·solaris文件系统的备份与恢复
- ·Solaris性能监控的Swap空间管理
发表评论