新客网WWW.XKER.COM:致力做中国最专业的网络学院!
学院: 操作系统 - 网络应用 - 服务器 - 网络安全 - 工具软件 - 办公软件 - Web开发 - 数据库 - 网页设计 - 图形图像 - 媒体动画 - 硬件学堂 - 存储频道 - QQ专区
您的位置:首页 > 网络学院 > 网络应用 > 路由技术 > 正文:路由交换中Switch命令详细说明

路由交换中Switch命令详细说明

新客网 XKER.COM 2008-01-17 来源:新客网搜集整理 佚名 收藏本文
 1.在基于IOS的交换机上设置主机名/系统名:

  switch(config)# hostname hostname

  在基于CLI的交换机上设置主机名/系统名:

  switch(enable) set system name name-string

  2.在基于IOS的交换机上设置登录口令:

  switch(config)# enable password level 1 password

  在基于CLI的交换机上设置登录口令:

  switch(enable) set password

  switch(enable) set enalbepass

  3.在基于IOS的交换机上设置远程访问:

  switch(config)# interface vlan 1

  switch(config-if)# ip address ip-address netmask

  switch(config-if)# ip default-gateway ip-address

  在基于CLI的交换机上设置远程访问:

  switch(enable) set interface sc0 ip-address netmask broadcast-address

  switch(enable) set interface sc0 vlan

  switch(enable) set ip route default gateway

  4.在基于IOS的交换机上启用和浏览CDP信息:

  switch(config-if)# cdp enable

  switch(config-if)# no cdp enable

  为了查看Cisco邻接设备的CDP通告信息:

  switch# show cdp interface [type modle/port]

  switch# show cdp neighbors [type module/port] [detail]

  在基于CLI的交换机上启用和浏览CDP信息:

  switch(enable) set cdp {enable disable} module/port

  为了查看Cisco邻接设备的CDP通告信息:

  switch(enable) show cdp neighbors[module/port] [vlan duplex capabilities detail]
收藏】 【评论】 【推荐】 【投稿】 【打印】 【关闭
发表评论
要记得去论坛讨论,点击注册新会员匿名评论
评论内容:不能超过250字,需审核后才会公布,请自觉遵守互联网相关政策法规。
阅读排行
随机推荐
实用信息推荐