QMAIL+MH设计方案(7)

新客网 XKER.COM 2007-01-09 来源：收藏本文

以下的的rc.config文件装载了初始化的必要组元。

#!/bin/bash
# This is adapted Bernhard Hailers old script
LOCAL_NUMBER="91311234" # tel no. 091311234
REMOTE_NUMBER="0911123456" # ISP tel no.
LOCAL_IP="192.168.0.99" # I have dynamic IP so this will do
REMOTE_IP="195.112.123.11" # your ISPs gateway
DEVICE="ippp0"
SYSPATH="/sbin"
ISDNCTRL="$SYSPATH/isdnctrl"
case "$1" in
start）
# turn on isdn
insmod /lib/modules/2.0.33/net/slhc.o
insmod /lib/modules/2.0.33/misc/isdn.o
sleep 1
# load the hisax module
insmod /lib/modules/2.0.33/misc/hisax.o
id=Tel0 type=5 protocol=2 irq=10 io=0x300
echo "starting isdn4linux"
# global
$ISDNCTRL verbose 0
$ISDNCTRL addif $DEVICE # create new interface
$ISDNCTRL addphone $DEVICE in $REMOTE_NUMBER
$ISDNCTRL addphone $DEVICE out $REMOTE_NUMBER
$ISDNCTRL eaz $DEVICE $LOCAL_NUMBER
$ISDNCTRL l2_prot $DEVICE hdlc
$ISDNCTRL l3_prot $DEVICE trans
$ISDNCTRL encap $DEVICE syncppp
$ISDNCTRL huptimeout $DEVICE 300
$ISDNCTRL chargehup $DEVICE off
$ISDNCTRL secure $DEVICE on
$SYSPATH/ifconfig $DEVICE $LOCAL_IP pointopoint $REMOTE_IP metric 1
$SYSPATH/route add default $DEVICE
$SYSPATH/ipppd /dev/ippp0 file /etc/ppp/options.ipppd &
$SYSPATH/route del default

;;
stop）
#turn off isdn
rmmod hisax.o
sleep 1
rmmod isdn.o
rmmod slhc.o
echo "Shutting down isdn4linux"
$ISDNCTRL delif ippp0
;;
*）
echo "Usage: $0 (start|stop）"
exit 1
;;
esac

上一篇：QMAIL+MH设计方案(6) 下一篇：QMAIL+MH设计方案(8)

【收藏】【评论】【推荐】【投稿】【打印】【关闭】